Products

Butyl Methacrylate(BMA)

CAS No : 97-88-1

Specifications :

• Appearance : Colorless Clear Liquide
•  Assay(GC) : >99.50%
• Chroma(pt-co) : <5
• Acid Value (as-MAA) : <0.01%
• Water:  <0.03%
• Inhibitor(MEHQ) : 10 + 5 ppm

Application :  Butyl methacrylate can be used as comonomer of polymethyl methacrylat. The monomer polymer has higher adhesive bonding and well elasticity, can be used for making the transparent interlayer material of complex safety glass; the polymer or copolymer of butyl methacrylate can be used as insulating potting compound, photo negative anti-halation layer, underwater paint, saloon car coating, synthetical adhesive, oil additives, finishing agent for paper, leather and textile.

Packing : Steel drums, 180kg net weight, or stainless steel tank .

Dipropylene Glycol Diacrylate(DPGDA)

CAS NO : 57472-68-1

Specifications :

• Appearance : Transparent Clear Liquide
• Ester Content : >96.0%
• Chroma(pt-co) : <45
• Acid Value(mg KOH/g) : <0.5%
• Viscocity(mPa.s@25c) : 6-13
• Moisture :  <0.15%
• Inhibitor  (MEHQ)  :  50+10ppm

Application :  Used as reactive diluent and crosslinking for radiation curing systems. Also as the resin crosslinking agent, plastic and rubber modifiers. Widely used in Encapsulants, Photoresists, Solder masks, Inks, Paints, Photopolymers, Binder adhesives etc.

Packaging : Steel drums, 200 kg net weight

Hydroxypropyl Acrylate(HPA)

CAS No : 25584-83-2

Specifications : 

•  Appearance : Clear liquid
•  Purity(Ester Content): ≥98%
•  Purity (GC): ≥95%
•  Color (Pt-Co): ≤30
•  Acid value (As AA): ≤0.3％
•  Water (m/m): ≤0.3%
•  Inhibitor (MEHQ): 200±50 ppm

Application : A most popular monomer used for synthesizing both water borne and solvent borne acrylic resins. It supplies primary hydroxyl to acrylic resin which offers fast reaction speed and moderate hardness. HPA based acrylic resins are widely used in 2KPU coating and heat-curing coatings, like automotive coating, industry coating, protective coating, HPA can also be used in synthesizing emulsion for non-woven textile, wall coating and industry coating. HPA’s hydroxyl group can further react with other chemicals, like phosphoric acid, generating new (meth)acrylate structure used in synthesizing acrylic resins. HPA also used for radcure coating for wood, plastic. It can offer good adhesion to substrate.

Packing : Steel drums, 200kg net weight, or requirement as Customer..

Glycidyl Mehtacrylate(GMA)

CAS No :  106-91-2

Specifications :

•  Appearance : Transparent clear liquid
•  Purity (GC)     : ≥98.5%
•  Color (Pt-Co) : ≤30
•  Acid value (As MAA) : ≤0.5%
•  Water (KF)  : ≤0.1%
•  Inhibitor (MEHQ) : 100±50ppm

Application : GMA contain an epoxy group and carbon-carbon double bond. So GMA has a high reactivity with a radical type and ionic type reaction. The product (GMA) is widely used in many fields, such as acrylic powder paint, latex paint, textile and leather finishing agents, vulcanized rubber, adhesives, photographic materials, organic synthesis, polymer synthesis, medicine and so on;

Packing : 200kg net weight, or requirement as Customer..

Methyl methacrylate (MMA)

CAS No : 80-62-6

Specifications :

•  Appearance : Clear liquid
•  Purity : ≥99.9%
•  Color (APHA): ≤10
•  Acid value (As MAA, wt): ≤0.01%
•  Water (wt): ≤0.05%
•  Inhibitor (Topanol A) : 10±5 ppm

Application : it mainly used as polymethyl methacrylate monomers (organic glass), also with other vinyl monomer copolymerization to get different nature of the product, also used in the manufacture of other resin, plastic, adhesives, coatings, lubricants, wood infiltration agents, motor coil soaking agents, ion exchange resin, paper, polish, textile auxiliaries, leather treatment agent and insulation pouring material and so on.

Packing : 190kg net weight, or requirement as Customer.

Stearyl Methacrylate (SMA)

CAS No : 32360-05-7

Specifications :

• Appearance: White waxy solid or clear liquid
• Purity: ≥98.0%
• Color (Pt-Co) : ≤0.5
• Acid value (mg KOH/g): ≤0.5
• Water (m/m): ≤0.05%
• Inhibitor (MEHQ): 200±50 ppm

Application : It is widely used as a reactive diluent and cross linker in the radiation curable system. Also be used as plastics, rubber modifiers, coating leveling agents, coatings and paints release agents, oil pour point depressants, various binders.

Packing : 170kg net weight or requirement as Customer.

Trimethylolpropane Triacrylate

CAS No : 15625-89-5

Specifications :

• Appearance:  Clear
• Ester Content  : ≥96%
• Color(APHA) :  ≤50
• Viscosity : 70-110
• Moisture  :  ≤0.15%
• Acid Value (mgKOH/g) : ≤0.3
• Inhibitor (MEHQ ppm) : ≤300

Application :

Trimethylolpropane triacrylate for UV coating dilution, characterized by reaction High activity, good gloss, good hardness and good Abrasion Resistance.

Packing : 200kg/drum, IBC.

2-(Acetoacetoxy)ethyl methacrylate (AAEM)

CAS No : 21282-97-3

Specifications :

•  Appearance: Light yellow clear liquid
•  Purity: ≥95.0%
•  Acid value (As MAA): ≤0.5％
•  Water (m/m): ≤0.5%
•  Inhibitor (BHT): 250±50 ppm

Applications :

l Acetoacetate ester polymer l High solid content acrylic resin solution l Radiation curing reaction of monomers l Cross-adhesive polymer l Cosmetic polymers l Self-crosslinking acrylic emulsion l Pesticide intermediates l Pharmaceutical intermediates l Replacing N-MAM, DAAM, HEMA, etc., better control of the reaction, better product performance.

Packing : 200kg net weight, or requirement as Customer..

Product Name Isobornyl Acrylate (IBOA)

CAS NO: 5888-33-5

Specifications :

• Appearance: Transparent clear liquid
• Purity (GC, monomer) ≥98.0%
• Color (Pt-Co): ≤30
• Acid value (mg KOH/g): ≤0.5％
• Viscosity (cps @25℃) 5~15
• Water (m/m): ≤0.05%
• Inhibitor (MEHQ): 100~150 ppm

Application :

l Used for heat-resistant organic sheets, fiber, adhesives, printing inks containing reagent, modified powder coating, cleaning coatings, high solids low viscosity coatings; Reactive diluent, modified resin monomer to increase toughness, and To improve the dispersibility of the resin to the pigment;

l IBOA suitable for the manufacture of high Tg thermoplastic acrylic resin, which product has high hardness, high alcohol resistance, heat resistance, good flexibility adhesion and moisture resistance, weather resistance.

 l IBOA is a new acrylate monomer with a specific structure, used the production of thin-film coating of soft plastic, such as PET, PE, PP, etc. And a decorative protective coating of PE, PP, PC and other plastic parts.

Packing: 200kg net weight, or requirement as Customer.

Butyl Methacrylate; BMA

CAS NO: 97-88-1

Specifications :

• Appearance: Colorless clear liquid
•  Assay (GC): ≥99.50%
•  Chroma (Pt-Co): ≤5
•  Acid value (As MAA): ≤0.01％
• Water: ≤0.03%
• Inhibitor (MEHQ): 10±5 ppm

Application :

Butyl methacrylate can be used as comonomer of polymethyl methacrylat. The monomer polymer has higher adhesive bonding and well elasticity, can be used for making the transparent interlayer material of complex safety glass; the polymer or copolymer of butyl methacrylate can be used as insulating potting compound, photo negative anti-halation layer, underwater paint, saloon car coating, synthetical adhesive, oil additives, finishing agent for paper, leather and textile.

Packing : Steel drums, 180kg net weight, or stainless steel tank.

Isobornyl Methcrylate (IBOMA)

CAS NO : 7534-94-3

Specifications :

• Appearance: Transparent clear liquid
• Purity (GC, monomer) :  ≥98.0%
• Color (Pt-Co): ≤30
• Acid value (mg KOH/g): ≤0.5％
• Viscosity (cps @25℃) : 2~15
• Water (m/m): ≤0.05%
• Inhibitor (MEHQ): 100~200 ppm.

Appliation :

Used for heat-resistant organic sheets, fiber, adhesives, printing inks containing reagent, modified powder coating, cleaning coatings, high solids low viscosity coatings; Reactive diluent, modified resin monomer to increase toughness, and To improve the dispersibility of the resin to the pigmentl IBOMA suitable for the manufacture of high Tg thermoplastic acrylic resin, which product has high hardness, high alcohol resistance, heat resistance, good flexibility adhesion and moisture resistance, weather resistance. l IBOMA is a new acrylate monomer with a specific structure, used the production of thin-film coating of soft plastic, such as PET, PE, PP, etc.

Packing : 200kg net weight, or requirement as Customer.

Lauryl Methacrylate (LMA)

CAS No : 142-90-5

Specifications :

• Appearance: Clear liquid
• Ester content: ≥98.0%
• Color (Pt-Co): ≤50
• Acid value (mg KOH/g): ≤0.5
• Water (m/m): ≤0.2%
• Inhibitor (MEHQ): 200±100 ppm

Application :

Lauryl methacrylate is an important chemical raw material, its homopolymer or copolymer of maleic anhydride and styrene, may improve the fluidity of petroleum products at low temperature. Lauryl methacrylate polymers have a comb structure, which solution has many characteristic. It is widely used as a reactive diluent and crosslinker in the radiation curable system. Also be used as plastics, rubber modifiers, coating leveling agents, coatings and paints release agents, oil pour point depressants, various binders.

Packing : 170kg net weight, or requirement as Customer.

2-Ethylhexyl Acrylate

CAS No : 103-11-7

Specifications :

• Appearance: Colorless Odor ,characteristic odor
• Physical State: Liquid
• Molecular Formula: C11H20O2
• Molecular Weight 184.3
• Relative Vapor Density(air=1) 6.35
• Vapor Pressure at 200C, Pa 19
•  Relative Density (water=1) 0.89
• Relative Density Of The Vapor/Air-Mixture At 200C(air=1) 1.00
• Boiling Point, 0C 213.5
•  Melting Point, 0C -90
• Solubility in water None
•  Open Cup Flash Point, 820C
•  Chemical Uses: Adhesive

Application :

2-Ethylhexyl acrylate (HA) is used as a raw material to make adhesives, coatings, construction materials, acrylic rubber, and emulsions.

Packing :  200 KG Drum Packing .

Methyl Acrylate (MA)

CAS No : 96-33-3

Specifications :

• Purity GC :  99.5 % (min)
• Appearance :  Visual C.F.S.M.
• Color : 10 PT-CO (max)
• Inhibitor Concentration  : 10 – 20 ppm MEHQ
• Water Content : 500 ppm (max)
• Acidity (as Acrylic Acid : 90 ppm (max)

Application :

Methyl acrylate is used in the composition of polymers and copolymers, with a wide range of industrial applications, such as: – acrylic and modacrylic fibers – resins and dispersions for paints, varnishes and inks, glues and adhesives – aqueous dispersions for non-woven fabrics, textiles and paper – cleaning and waxing products – plastic and synthetic resins – synthetic rubbers and latexes – organic synthesis

Packing : Methyl acrylate is delivered: – 20MT with ISO tank – 180Kg with steel drum .

Butyl Acrylate

CAS No : 141-32-1

Specification :

• Purity : ≥99.5
• Color : ≤10
• Water Co0ntent : ≤0.05
• Inhibitor : 10~20
• Acidity  : ≤50
• Specific Gravity  : 0.896~0.901

Application :

Butyl acrylate is used in the composition of copolymers with various industrial applications. – Resins and dispersions for paints, varnishes and inks, glues, pressure sensitive adhesives – Emulsion polymers or dispersions for non-woven fabrics, textiles, paper, leather – Cleaning and floor waxing products – Plastics and synthetic resins, ,synthetic rubbers and latexes

Packing : Butyl acrylate is delivered: – 20MT with ISO tank – 180Kg with steel drum .

Ethyl Acrylate

CAS No : 140-88-5

Specifications :

• Assay :Gas chromatography min. 99.5 %
• Water content :  max. 0.1 %
• Acid content : (calc. as Acrylic Acid) max. 0.01 %
• Colour on despatch : APHA, max. 10
• Standard stabilization  : 15±5 ppm MEHQ

Application :

Ethyl acrylate is used as a raw material for fiber processing agents, adhesives, coatings, plastics, acrylic rubber, and emulsions.

Packing : Tanker truckload (lorry), drum, oilcan.

Dimethyl Carbonate

CAS No : 616-38-6

Specification :

• Content : Gas Chromatography : Weight  Min (99.90%min.)
• Methanol : Gas Chromatography  : Weight Min ( 0.02% Max )
• Moisture : Karl Fischer : Weight : 0.02 %Max .
• Color : PT-Co Colorimetri : APHA Color : 5 Max.
• Relative Density : Picnometer Method : g/cm3 (20.C) : 1.071 + 0.005

Application : Use explosion-proof electrical/ventilating/lighting/equipment.Use only non-sparking tools. Take precautionary measures against static discharge. Wear protective gloves/eye protection/face protection.

Packing : 200Kgs/Drum , 23,000 to 25,000 KGS/ Iso Tank

Propylene Glycol

CAS No : 57-55-6

Specification :

• Content : 99.50 % Min.
• Moisture :  0.10 % Max
• Chroma : 5.00 Apha Color Max.
• Refractive Index @ 20.C : 1.431 – 1.435
• Relative Density @ 20.C, g/cm3 : 1.035 – 1.038
• Distallation Range :  184-190 Centigrade.

Application : It is used to absorb extra water and maintain moisture in certain medicines, cosmetics, or food products. It is a solvent for food colors and flavors, and in the paint and plastics industries. Propylene glycol is also used to create artificial smoke or fog used in fire-fighting training and in theatrical productions.

Packing : 215KGS/DRUM 22000-23000KGS/Flexitank 20000Kgs-25000Kgs/Isotank

Dipropylene Glycol

CAS No : 25265-71-8

Specifications :

• DPG Assay : (wt)  Min. 99.50 %
• Specific Gravity @ 20/20℃ : 1.020 -1.025
• Acidity : wt.ppm (as Acetic Acid) Max. 30
• Water : wt.ppm Max. 1000
• Chloride : wt.ppm Max. 1.0
• Iron : wt.ppm Max. 0.20
• Residue : wt.ppm Max. 50
• Color : APHA Max. 10
• Suspended Matter Free
• Distillation :  (IBP / DP) 228 – 240 ℃

Application : DPG is used as a solvent, coupling agent and chemical intermediate. 1. A reactant in unsaturated polyester resins to add flexibility and hydrolytic stability to the finished resin. 2. An initiator for urethane polyol synthesis using epoxides and for the polyol in rigid polyurethane foams. 3. A solvent in printing inks, a solvent in processes to extract aromatics from hydrocarbon mixtures, a solvent and coupling agent in hydraulic fluids and textile lubricants. 4. Esterification with benzoic acid to make dipropylene glycol dibenzoate for plasticizer.

Packing : Product is available in barges, lined tank cars and dedicated tank truck, and 215kg nonreturnable drums.

Propylene Carbonate

CAS No : 108-32-7

Specifications :

• Content  : >99.5 % Min
• Color : ≤16.00  APHA
• Moisture : ≤0.05% Max.
• Relative Density : g/cm³（20℃) : 1.203±0.005

Application : Propylene Carbonate is used as a physical solvent for removal of carbon dioxide (CO2) and hydrogen sulfide (H2S) in natural gas treating, oil pyrolysis gas, and synthetic ammonia conversion gas applications. It is also used as an oil solvent and as an extraction agent for olefins and aromatics.

Packing : 250Kgs/Drum, 20000Kgs-25000Kgs/Iso tank

Hexahydrophthalic Anhydride(HHPA)

CAS No : 85 – 42 – 7

Specifications :

• Purity  : ≥99.5 wt%
• Molten Color  : ≤30 APHA
• Free Acid Content : ≤1.0 wt%
• Solidification Point  : ≥32 ℃
• Iodine Value  : ≤1.0 gl2/100g
• Acid Value  : 715-735 mgKOH/G

Application : HHPA is mainly used as an intermediate for coating resins (alkyds, polyesters), plasticizers, sealant, curing agent in adhesive, insect repellents, rust  inhibitors, electronics applications.

Packing : 220 KG Steel Drum .

Tetrahydrophthalic Anhydride(THPA)

CAS No : 85-43-8

Specification :

• Appearance  : White Flake
• Purity  : ≥99.0 wt%
• Molten Color  : ≤30 APHA
• Free Acid Content  : ≤1.0 wt%
• Solidification Point  : 100±1.5 ℃

Application : Tetrahydrophthalic Anhydride is an anhydride hardener mainly used in the fields of coatings, epoxy resin curing agents, polyester resins, adhesives, plasticizers, pesticides, etc. It is also used as a chemical intermediate for light colored alkyds.

Packing : polyethylene bag 25 kg; big bags 500/1000 Kg; bulk in liquid form.

Monosodium L-Glutamate

CAS No : 6106-04-3

Specifications :

• Assay Not less than 99%
• pH (5% solution) : 6.7 ~ 7.2
• Loss on Drying Not more than  0.5%
• Specific Rotation Between  : +24.8o – +25.3o
• Chloride Not more than : 0.04%
• Pyrrolidone carboxylic acid Not more than : 0.2%
• Lead (Pb) Not more than : 1.0 mg/kg
• Arsenic (As) Not more than : 1.0 mg/kg
• Cadmium (Cd) Not more than : 1.0 mg/kg
• Mercury (Hg) Not more than : 0.1 mg/kg
• Medium Crystal : +45 ,Regular Crystal : -25 ~ +60
• Small Crystal : -45 ~ +100 ,Fine Crystal : -60 ~ +120
• Powder : -100

Application : It Is  used commercially in broths, soups, canned and frozen vegetables, flavouring and spice blends, gravies, meats, poultry, and sauces and in other combinations.

Packing : 25 Kg Bag .

Isopropanol

CAS No  : 67-63-0

Specifications :

•  Molecular Weight : (g/mol) 60.1
•  Boiling Point :  @ 760 mmHg : 1.01 ar 82 °C (180 °F)
•  Flash Point (Setaflash Closed Cup) :12 °C (54°F)
• Freezing Point : -89 °C (<-128°F)
•  Vapor pressure : @ 25°C —
• extrapolated  : 33.1 mmHg 6.02 kPa Specific gravity (20/20°C) 0.786
•  Liquid Density : @ 20°C 0.79 g/cm3 Vapor Density (air = 1) 2.1
• Viscosity :  (cP or mPas @ 25°C) 2.1 Surface tension (dynes/cm or mN/m @ 20°C) 21.4

Application : Nitrocellulose lacquers and thinners, Coupling agent in cleaners and polishes, Dehydrating agent ,Extractant, Adhesives, Pharmaceutical, Cosmetics and toiletries.

Packing : Tank , Truck .

Citric Acid Anhydrous

CAS No : 77-92-9

Specifications :

• Assay : (%) 99.5 – 100.5
• Water  : (%) 0.5 max
•  Identification Passes : USP/FCC tests Residue on Ignition (%) :  0.05 max Oxalate/Oxalic Acid (%) : 0.036 max
•  Sulfate (%) : 0.015 max
•  Arsenic (ppm) : 1 max
•  Heavy Metals (ppm) : 5 max / FCC IV Ed. Lead (ppm) 0.5 max
•  Readily Carbonizable
•  Substances : Passes USP and FCC tests Tridodecylamine (ppm) :  0.1 max
• Color & Clarity : Passes USP Tests

Application : Citric acid Anhydrous E330 is mainly used as an acid condiment, flavoring agent and preservative in food and beverage and as pharmaceutical excipients in pharmaceutical industry. It is also used as antioxidant, plasticizer and detergent builder in chemical, cosmetics and detergent industries.

Packing :  25 Kg Polythyne Bags .

Citric Acid Monohydrate

CAS NO : 5949-29-1

Secifications :

• CONTENT :  99.5-100.5
• WATER(%) :   7.5-9.0
• READILY CARBONIZ:   ≤1.0 IBLE
• SULFATE% :  ≤0.015
• OXALATES%  :   ≤0.01
• MURIATE%:  ≤0.005
• SULFATED ASH%  :   ≤0.0
• CALCIUM SALT%  :   <0.02
• PLUMBUM (MG/KG) :   ≤0.5

Application : Citric acid is used as an excipient in pharmaceutical preparations due to its antioxidant properties. It maintains stability of active ingredients and is used as a preservative. It is also used as an acidulant to control pH and acts as an anticoagulant by chelating calcium in blood.

Packing : 25kg/Bag